Badger airbrush and canister bought at Bras Besah Artwork shop (Art Friend). Total costs : $78.90. Touchup paint obtained from Borneo Motors. RJ Thin coating putty for leveling and cover up of deep cut on the bumper. Sandpaper grit 800 for smoothing after putty. Spray over using the airbrush once the putty has dry up. Didn't purchase the mini compressor as it is pretty costly though it can be used for other purspose. Place to obtain mini compressor? Well Sunshine plaza next to the Nanyang Academy of Fine arts, Singapore.



Altis silver grey color code is 1D0. The color code can be found at the engine compartment when you open up the bonnet.



All the stuffs needed for the artwork on my altis.

Thin coating putty for sealing up a deep scratch on my bumper. Found this putty (S$4.50) at a nearby hardware shop. Bought a sandpaper grade 800 (S$0.50) for fine sanding of excess putty. Pending to get the color code 1D0 for my altis grey. Sourcing for a airbrush compressor for spraying to the cracked surface. Not sure about clear coating.. think this is needed for making it glossy to the surface. Determination is the key to success!

Here are some pictures of my newly bought Canon IXUS 950IS. :) Features:-

1. New PureColor LCD
2. Superb Image Quality
3. Multiple Face Detection Technology
4. Steady Images with Optical Image Stabilizer
5. New Time Lapse Movie
6. Movie and Sound Recording
7. 16:9 Widescreen
8. Image Inspection Tool
9. Point & Shoot Simplicity
10. New Creative Light Effect
11. Enhanced My Colors Function and many more feature rich function.

For more product details, it can be found at http://www.canon.com.sg/

Found a scratch at my front left bumper this Monday morning. Not sure how i got that deep scratch but it is not very obvious in overview. From the look at it, I may have to put putty and sand off the surface to blend into the existing color. Next, use a compressor with airbrush to spray paint that area. Oops.. got to mask the other areas first before i do the spray. Paint wise, I have to get it from the manufacturer. Perhaps, just a small bottle will be enough.

3 Hours job to completely wash, clay, glaze, seal and wax. These are the steps applied:

1. Wash car to get rid of contaminants on surface

2. Use claybar to get rid of contaminants sticking to the car surface.

3. Wash and dry.

4. Use of higlaze to clean and get rid of stains.

5. Use of 3M liquid wax to wax the whole car.