Borrowed a 12 volt orbiter from a friend for the waxing and buffling. Knowing that some polisher/orbiter may create swirl mark on the car surface, I try it on my boot. Here are the steps that I applied:-

1. Wash boot surface with water to remove dirt.
2. Use claybar with soapy water to remove hard to remove contaminants.
3. Wipe dry with a cloth and make sure the surface is clean.
4. Applied Hi-Glaze88 onto the trunk surface and let it dry.
5. Use the orbiter and buff off the glaze.
6. Use microfibre cloth to remove any other residue on the surface.

Here's the end result of the trunk surface. As it is evening time, there isn't enought sunlight to see the surface. Will observe under strong lighting in my car park if i have the chance.

Will proceed for a full glazing once proven that the surface is clear of swirl markings.

On the other hand, the use of Pink Wax seems not favourable as the surface tend to 'blur' after i apply the pink wax and buff off.

Guess Hi-glaze88 is sufficient for me.